Product Introduction
ÖLFLEX® SOLAR XLR-E 1x4 WH/BK
Solar cable; 1X4; black; 1,8 kV DC; U0/U: 1 /1 kV; Electron beam cross-linked polymer compound; Fixed Installation; Halogenfree
Benefits
- Extruded colour stripe serves as reverse polarity protection during installation.
- Exact quantity control during installation by meter marking on the cable sheath
- Reduction of flame propagation and of toxic combustion gases in the event of fire
- Robust against mechanical impacts
- For outdoor applications
Applications
- For the cabling between the solar modules and as extension cable between the module strings and the DC/AC inverter
- Underground use inside protection conduits/ ducts for burial in combined case of (1) secure dissipation of water(logging) from outer cable surface, as well as (2) laying of conduit/ duct in professionally built cable trench with at least 50 cm of back-fill soil (70 cm underneath roads), above indicating tape, above covering plastic slab, above at least 10 cm of covering sand layer, above the conduit/ duct laid on at least 10 cm high sand bed layer
- Long-term permanent storage/ operation in water not permitted
- Not suitable for direct burial, Installation according to IEC 60364-5-52, respectively HD 60364-5-52
- For use in photovoltaic-systems with rated DC voltage up to 1,800 V to ground
Technical Attributes
| Brand | ÖLFLEX® |
|---|---|
| Product type | Solar cable |
| Weight | 70 kg/km |
| Copper index | 38.400 kg/km |
| Nominal voltage | U0/U: 1 /1 kV AC rms according to IEC U0/U: 1,5/1,5 kV DC according to IEC |
|---|---|
| Operating voltage (max.) | 1,8 kV DC |
| Harmonised design | H1Z2Z2-K |
|---|---|
| Cable dimension | 1X4 |
| Conductor cross-section (mm²) | 4 mm² |
| Including protective conductor |  |
| Number of cores | 1 |
| Nominal diameter of core | 3.8 mm |
| Min. outer diameter | 1 |
| Nominal diameter of core | 3.8 mm |
| Min. outer diameter | 5.3 mm |
| Nominal outer diameter | 5.4 mm |
| Max. outer diameter | 5.7 mm |
| Shape of cable | Round |
| Core insulation base material | Electron beam cross-linked polymer compound |
| Base material outer sheath | Electron beam cross-linked polymer compound |
| Cable insulation colour | Black |
| Application area | Fixed Installation |
|---|---|
| Minimum bending radius, fixed installation | 5 x outer diameter |
| Minimum bending radius in mm, fixed installation | 28.5 mm |
| Minimum bending radius, occasionally moved | 15 x outer diameter |
| Temperature, fixed installation | -40 °C to 90 °C |
| Temperature, occasionally moved | -25 °C to 90 °C |
| Storage temperature minimum | -40 °C |
| Max. storage temperature | 40 °C |
| Flame-retardant |  |
| Flame retardance according to | IEC 60332-1-2 |
| corrosiveness of combustion gases according to | EN 50267-2-2 |
| UV-resistant | |
| UV-resistant according to | VDE 0276-605 |
| weather resistant | |
| weather resistant according to | HD 605 S2 |
| ozone resistant | |
| Ozone-resistant according to | EN 50396, method B |
| Chemical resistant | |
| Halogenfree | |
| Zero halogen according to | IEC 60754-1 |
| Oil-resistant | |
| PWIS-free | |
| LABS-free according to | VDMA 24364-B2-L |
| Permanently immersible in water | |
| CE marked | |
|---|---|
| UKCA marked | |
| HAR-certified | |
| Product standard DIN / EN | EN 50618 |
| TÜV certified | |
| Flame retardance tested according to UN/ECE-R118 | |
